Skip to product information
1 of 4

LongUSB 10G – USB 3.2 Gen 2 Fiber Optic Extension Cable 10Gbps, Active Optical USB-A Male to Female, 30ft–100ft

LongUSB 10G – USB 3.2 Gen 2 Fiber Optic Extension Cable 10Gbps, Active Optical USB-A Male to Female, 30ft–100ft

Regular price $201.04
Regular price Sale price $201.04
Sale Sold out
Length

LongUSB 10G – USB 3.2 Gen 2 Fiber Optic Extension Cable, 10Gbps USB-A Male to Female, 30ft–100ft

2027 Model. LongUSB 10G is the 2027 model of fiber optic USB extension cable, new to the market and made to put USB devices far from the computer without losing speed.

Extend a USB connection up to 100ft at full USB 3.2 Gen 2 speed (10Gbps). Normal copper USB 3.x cables stop working reliably after about 10ft. This hybrid active optical cable (AOC) carries the high-speed data over optical fiber and the low-speed signals over copper, so cameras, VR headsets, drives and other devices work at full speed at the far end of the room or the building.

It is a plain USB-A male to USB-A female extension, so it works with any USB device and needs no drivers. At only 0.20 in thick, the cable is light and flexible and supports conduit installation.

  • USB 3.2 Gen 2, 10Gbps, backward compatible with USB 3.1, 3.0, 2.0 and 1.1
  • USB-A male (host) to USB-A female (device)
  • Powered by the USB port, with an optional Micro-USB power input for power-hungry devices
  • Plug and play, no drivers
  • Lengths 30ft, 50ft and 100ft

Tap a button below to view details:

Key Features
  • USB 3.2 Gen 2 data transfer at up to 10Gbps over the full length
  • Backward compatible with USB 3.1, 3.0, 2.0 and 1.1 devices
  • Hybrid fiber and copper cable for long-distance lossless transmission with no delay
  • Immune to electromagnetic and radio interference
  • Micro-USB power input on the device end for extra power when a device needs more than the USB port can supply
  • Zinc alloy connector housings, strong and durable
  • Slim 0.20 in cable that supports conduit installation
Technical Specifications
USB standard USB 3.2 Gen 2 (10Gbps), backward compatible with USB 3.1/3.0/2.0/1.1
Connectors Host end: USB Type-A male. Device end: USB Type-A female
Lengths 30ft, 50ft, 100ft (actual lengths 10m, 15m, 30m)
Cable diameter 0.20 in
Construction Optical fiber + tinned copper, PVC jacket
Optical wavelength 850nm
Connector housing Metal, nickel-plated contacts
Power From the USB-A port (5V, 900mA). Optional Micro-USB power input when the port cannot supply enough
ESD protection ±8kV air discharge, ±4kV contact discharge
Max pulling force 22 lb
Operating temperature 32°F to 104°F
Storage temperature -4°F to 140°F
Compatible Devices

Host (computer side): desktop computers, laptops, mini PCs and game consoles with a USB-A port.

Devices: webcams and cameras, VR headsets, external hard drives and SSDs, USB flash drives, printers, scanners, keyboards, mice and USB hubs.

Typical installs: conference room cameras, VR play spaces, simulation rigs, studio and lab equipment, and printers or scanners in another room.

Note: full 10Gbps speed needs both the computer port and the device to support USB 3.2 Gen 2. Slower devices work at their own speed.

How to Connect

This cable is directional. Each end is labeled.

  1. Plug the end marked Host (USB-A male) into your computer or console.
  2. Plug your USB device into the end marked Device (USB-A female).
  3. If the device does not power on or disconnects, plug a 5V Micro-USB power adapter into the Micro-USB port on the device end.

If the device is not detected, check that the cable is not reversed. It will not work backwards.

Installation & Care Tips
  • At 90° turns in conduit, use a curved (sweep) elbow, not a sharp right-angle joint.
  • Feed the cable in carefully to avoid scratching the jacket. Do not twist or knot it.
  • Do not pull with more than 22 lb of force during installation.
  • When plugging or unplugging, hold the metal connector housing, not the cable.
  • Do not hit, drop or crush the connectors. They contain the optical conversion chip.
  • Rated for indoor use from 32°F to 104°F.
Frequently Asked Questions

Q: Will it slow down my device?

A: No. It carries USB 3.2 Gen 2 at up to 10Gbps over the full length, with no delay.

Q: Do I need drivers or software?

A: No. It is plug and play on Windows, macOS, Linux and game consoles.

Q: When do I need the Micro-USB power input?

A: Only for devices that draw a lot of power, such as some hard drives, cameras or hubs. Most devices work without it.

Q: Can I connect two of these together?

A: We do not recommend chaining extension cables. Choose one cable long enough for the full run.

Q: Which length should I order?

A: Measure the full route, including the runs up and down the walls, and choose the next length up so you have some slack.

View full details

Questions or Request? We’ll reply within 24 hours.